laser_material_library
**This is an old revision of the document!**
Table of Contents
Laser Material Library
A place to document known-good powers/speeds for various materials.
Lightburn Materials Library
The project design/driving software used in TheLab, Lightburn, has recently been loaded with a Materials Library provided by a member. Details for accessing/using the materials settings can be found within the Lightburn documentation at:
Local Setting
The following settings are those found to be useful for the local Trogdor machine:
Plywood
3mm
- Cutting on Trogdor: TODO mm/min, TODO % power
5mm
- Cutting on Trogdor: TODO mm/min, TODO % power
Acrylic
3mm
- Cutting on Trogdor: TODO mm/min, TODO % power
5mm
- Cutting on Trogdor: TODO mm/min, TODO % power
laser_material_library.1749648819.txt.gz ยท Last modified: 2025/06/11 13:33 by 8c244b37-0747-c193-0a4e-0967254778dd