TheLab.ms Wiki

https://wiki.bambulab.com/en/x1

There area just a few steps required before you to can successfully print your first 3D design.

• Design your project within a CAD 3D print design software
• Import the design into your local version of Bambu Studio, the software that drives the actual machine. This is not required but is recommended for your initial designs so can become familiar with the usage of Bambu Studio.
• Take your design to TheLab computer and version of Bambu Studio for the actual print process.

There are a number of 3D print design/CAD software packages that can be used to create/modify your design such as TinkerCad, Blender, FreeCad, Fusion, etc. We will not attempt to detail them here.

• After your design is complete export the design file in a format acceptable to Bambu Studio.

The Lab currently has 2 of the Bambu X1 Carbon printers, know as “Giga” and “PLA Only”.

• As named, the “PLA Only” printer should be used only with PLA filament.
• The “Giga” printer can be used with most other filament types.

Both printers have attached to them a 4 spool AMS, Automatic Material System“ option. This facilitates automatic switching of the available filament. Initially this guide will not cover AMS usage.

Bambu Labs “Bambu Studio” is the software used to actually drive the printing process.

If you are not familiar with Bambu Studio it is recommended you install the software on your local machine. Although this will not allow you to actually connect to the physical machines, it will give you an opportunity to become familiar with the product at your leisure.

A good place to start is the Bambu Quick Start Guide which will step you through the installation and general usage of the product.

• The Guide: https://wiki.bambulab.com/en/software/bambu-studio/studio-quick-start

This can be followed up with the following which may add to information contained within the quick start.

• Bambu Studio Beginner Tutorial: Learn the basics: https://www.youtube.com/watch?app=desktop&v=kck5jv2-uao
• Bambu Studio Keyboard Shortcuts: https://wiki.bambulab.com/en/software/bambu-studio/3d-scene-operations

Once one is comfortable one can perform these steps on the Lab machine version of Bambu Studio if desired.

You will repeat most these steps at the Lab, running through them at home will help you become familiar with the studio product at your leisure. Once comfortable with the tool it is perfectly acceptable to perform these steps on the Lab machine. The final configuration will depend on the Lab machine setup

• The first step is to To import the your design file. Supported files include .3mf .stl .stp .step .amf .obj.
  • Click File→import→import 3MF/STL/STEP/…
• The Prepare Tab should automatically open with your project displayed in the center of a print plate.
• Note and Correct any errors reported by the Studio

• Select Printer Type, Bambu Lab X1, (Nozzle size will depend on what you printer has installed)
• Select Plate Type, depending on type type of filament
• Bambu Plate Types: https://wiki.bambulab.com/en/filament-acc/acc/plates
• Add/select your filament. For this if you are not sure if using PLA you can choose Bambu PLA Basic. The following Bambu wiki gives a good overview of filament types/usage:

  • The basics: https://wiki.bambulab.com/en/knowledge-sharing/filament-guide-beginners
  • Bambu Filaments and Accessories: https://wiki.bambulab.com/en/filament-acc
  • Filament guide - Compatibility to printer, nozzle, AMS, build plate, glue and required parametes https://wiki.bambulab.com/en/general/filament-guide-material-table

  * The remaining items can be left to default until you are more familiar with the process. The default settings should be fine for your first print if it is not too complicated.

• Select the “Preview” tab
• Note and correct any errors, add supports to your project if needed.
• Use the mouse scroll wheel to zoom in and out, left button to view the object from different perspectives, right mouse button to reposition the plate within the view port.
• Bambu Studio Keyboard Shortcuts: https://wiki.bambulab.com/en/software/bambu-studio/3d-scene-operations

• Press the Slice Plate button on upper right to start the slicing process
  • Bambu Studio - Complete Beginner’s Guide to Slicing for 3D Printing : https://www.youtube.com/watch?v=xUi54VpSeek
  • Note and correct as needed any reported errors/warning
• If successful a dialog containing “Slice ok” should be displayed. Also you will find a “Color Scheme” chart that indicates various characteristics of the pending print process

If the slicing process notes any errors/concerns they will be presented. One example is if your design needs “supports” to aid in printing parts that hang out over space, unsupported. These you would need to trim from your final product.

* How to create automatic or manual supports: https://www.youtube.com/watch?v=-CUSWpVZsUY * Normal vs. Tree Supports: https://www.youtube.com/watch?v=RXVVvZciR9Q

When done previewing/defining/slicing your project settings on your personal copy of Bambu Studio, export the project from your local copy of Bambu Studio. This then can be taken to TheLab to be loaded on the Lab version of Bambu studio

• If you export the project from Studio as “Export all plate sliced file…”, it can be loaded into the Lab version of Studio however, you will “not” be able to revisit the prepare tab with this model. Attempting to do so will cause Studio to create a new model.
• if you think you want to modify some of the “Prepare” characteristic you can export as .stl
• This will become less burdensome once you become comfortable using the Studio within the lab, most likely after one or two print cycles.

Visually inspect the printers to ensure one is available for use before continuing, otherwise this may just waste your time.

• login on to the Lab's silver mini computer located in the atrium area next to the book cases, pin code is on the lower right hand side of the monitor. Note: The computer in the print room also has Bambu Studio loaded but it is “not” connected to the printers at this time.
  • If someone has an instance of Studio already running and is monitoring a current print job, do not interrupt the job in progress. You can however open a second instance of Bambu Studio targeting the available printer.

DO NOT log into the Bambu Labs internet site within Bambu Studio with your personal Bambu Lab account. Doing so will prevent the normal print process. The generic Lab account must be used

Do not update the Lab version of Bambu Studio if presented with the option. Confer with the area coordinator and via the “Bambu” discord channel if you have version concerns.

• Insert your thumb drive, then import the file you saved at home, the original .stl, gcode, or what ever format Studio will accept.
  
  * Do NOT attempt to login in to your own personal Bambu account.
• EDITOR NOTE: Clarify what login
  • Doing so will logout the Lab shared 3d printing account tied to the Bambu printer in the lab.
  • EDITOR NOTE: Whom to contact if not currently logged in?

• Verify the project settings, printer, build plate, filament, etc are acceptable
• Refer to the “Member local Bambu Studio” section if you need a refresher of the particulars.

Here you can select and set as needed your printer characteristics corresponding to the available printer. * You can “get” the current state of the selected printer to determine it's characteristics

* EDITOR NOTE: MORE NEEDED FOR CHARACTERISTICS

• Double check that the printer currently selected is the desired idle printer.
• The dialog will show the expected print duration and filament consumed.
• The initial default settings, other than printer selection, should be fine until you are more familiar with the implications.

• select the “Preview” tab
• Note and correct any errors
• Refer to the “Member local Bambu Studio” section if you need a refresher of the particulars.
  * click “Slice Plate” to slice the file
• Bambu Studio - Complete Beginner’s Guide to Slicing for 3D Printing : https://www.youtube.com/watch?v=xUi54VpSeek

Visually inspect the printer to ensure one is still available for use before continuing.

• The printers are intended to remain on at all times. So they should not be turned off.

• verify filament currently installed on machine
  • One can use “Lab” filament for the current price of .03 cents per gram.
  • There is a scale by the machines
  • There is a payment QR code on the wall between the machines
  • Members who bring their own filament are encouraged to label their rolls as unlabeled rolls are considered fair game. “Lab” rolls are typically not labeled as such
  • Extra lab rolls can be found in one of the bins marked as such below the printers

First a some “plate” definitions

• This is the non removable print plate that contains a heating element which varies in temperature depending on filament type used. Proper temperature helps to ensure a successful print.
• This plate should never come in contact with any foreign substance be it filament, glue, etc.
• You must ensure there is a magnetically attached print plate on the heat bed before attempting a print.

• This is thin removable, magnetically attached plate that is place on top of the heat bed. Different plate designs have been developed to enhance the print process/success rate. These plates are designed to be removable for easier cleaning and occasional replacement if necessary.
• NOTE: Some print filaments/procedures may suggest placing glue or some other substance on the print plate to aid in filament adhesion. DO NOT allow such substance to come in contact with the heat bed. Before attaching a print plate please ensure the side that contacts the heat bed is of free of foreign substances. Better yet clean the print plate before using to ensure maximum print adhesion and to avoid contaminating the heat bed.
• Choose a print plate appropriate for your project and allow it to magnetically attach to the heat bed.
• Bambu Plate Types: https://wiki.bambulab.com/en/filament-acc/acc/plates

The print plates should be inspected and cleaned if necessary before using. The following are some how tos:

• Bambu Lab Textrued PEI Plate Cleaning Guide: https://wiki.bambulab.com/en/filament-acc/acc/pei-plate-clean-guide#:~:text=After%20applying%20the%20dishwashing%20detergent,the%20plate%20from%20the%20sides.
• How to Clean Bambu Lab Cool/PLA Print Plate: https://www.youtube.com/watch?v=s93wR_DHtdk&t=90s

If the printer is ready to go, the slicing within Studio is successful and the available printer is selected within Studio then one can “Send” the job to the printer. Sending involves uploading the project to the Bambu cloud from which it will then be sent to the selected printer.

Within Bambu Studio, Preview tab

• If the slicing is complete and successful, click on the “Send” button.
• A progress bar at the bottom of the dialog will show upload progress.
• When the “send” is complete, the Device tab will display a camera view along with the expected print time and filament to be consumed.
• Click on the green arrow on the left mid screen to turn on the video view.

The following Bambu Lab link will provide further printing details.

• NOTE: In spite of this documents suggestion DO NOT log into the Bambu Labs internet site within Bambu Studio using your personal Bambu Lab account. Doing so will prevent the normal print process. The generic Lab account must be used
• Printing from Bambu Studio: https://wiki.bambulab.com/en/p1/manual/print-from-bambu-studio

One your print is complete the Device tab within Studio will display a print complete status message.

• Don't forget to close “YOUR” instance of Bambu Studio”. When doing so discard any “modified values” to prevent any global Studio changes from affecting other members.
• Make sure you do not close another other instances which may be controller other members unattended print jobs.

Generally you can remove your printed job from the print plate via a finger nail scrape, if that proves problematic there are “plastic” scraper tools located in one of the drawers between the printers.

• Under no circumstances is it acceptable to use metal tools on these print plates, that will damage them rendering them unusable.