Differences

This shows you the differences between two versions of the page.

--- woodshop:tablesaw [2026/06/20 21:41] – add dust collection note and pic 8c244b37-0747-c193-0a4e-0967254778dd
+++ woodshop:tablesaw [2026/07/09 00:36] (current) – added Outfeed Table desc and pics 8c244b37-0747-c193-0a4e-0967254778dd
@@ Line 1: / Line 1: @@
- #### Saw Blade Cleaning
+## Laguna Fusion I Table Saw
-##### Supplies:
+### Outfeed Table
+There is now an outfeed table permanently attached to the Laguna table saw. It's a homemade affair that still needs a few tweaks and mods.
+Below you will find a few pictures detailing how to set up the outfeed table.
+The table has a single non adjustable sliding leg that holds the table in the extended position. This may be modified in the future if we find it does
+not adequately do the job for us.
+This leg assembly has three locking positions on the leg located on the underside.
+{{woodshop:tablesaw_outfeed_locking_parts.png?150}}
+. Stowed Position where the entire leg is tucked up out of the way so the table will fold down
+. Leg retraction lock to lock the extendable portion of the leg in the stowed position so it does not slip down when dropping the outfeed
+. Leg extended lock to lock the extendable portion in the extended position to hold the outfeed up for use when processing larger pieces.
+{{woodshop:tablesaw_outFeed_extended.png?150}}
+{{woodshop:tablesaw_outfeed_leg_lock_for_folding.png?150}}
+{{woodshop:tablesaw_outfeed_lock_for_fold_position.png?150}}
+{{woodshop:tablesaw_outfeed_leg_extended.png?150}}
+{{woodshop:tablesaw_outfeed_extended_leg.png?150}}
+{{woodshop:tablesaw_outfeed_extended_leg.png?150}}
+{{woodshop:tablesaw_dust_port_new_position.png?150}}
+### Saw Blade Cleaning
+#### Supplies:
  --  CMT Formula 2050 - pump spray
@@ Line 29: / Line 68: @@
 {{woodshop:tablesaw_collector_port.png?150}}