Differences

This shows you the differences between two versions of the page.

--- woodshop:scrollsaw [2026/08/03 21:18] – created, preliminary 8c244b37-0747-c193-0a4e-0967254778dd
+++ woodshop:scrollsaw [2026/08/05 12:50] (current) – add dust collection 8c244b37-0747-c193-0a4e-0967254778dd
@@ Line 1: / Line 1: @@
-### Delta Shopmaster SA 180 1" belt, 8" disk sander
+### Wen Model 3920 16” Variable Speed Scroll Saw
-This sander currently resides on the 4 shelf collapsible shelf. Also on that shelf you may find any available spare sanding belts that are specific to this machine. Spare sanding disks may be found within a container elsewhere within the wood shop area.
 #### Dust Collection
-It is mandatory that if you are going to run the machine you **MUST** connect the dust collection vacuum system. This
-will help but not eliminate creating a dust mess.
-**NOTE:** If the collection system does not seem to be working adaquatly please post a note to the woodshop discord channel.
-This is the Delta Shopmaster  model SA 180 belt/disk sander
-Note The extra sand paper in various grits within the blue box, the dust collector machine to 2" hose adapter within the red box. Both of these must stay with
- the machine at all times.
-{{woodshop:delta_sander.png?150}}
-The sander has two dust collection ports. One when using the belt sander, the other when using the disk. At present we do no have them connected together
-so please ensure the correct port is connected to the collector vacuum. If you are going to use both belt and disk you will need to move the adapter accordingly.
-This is the connection for the belt dust port
-{{woodshop:delta_sander_belt_dust_port.png?150}}
-This is the connection for the disk collection port
-{{woodshop:delta_sander_disk_dust_port.png?150}}
-This shows the machine to 2" hose adapter in green connected to the disk dust port, and the 2" hose to 4" hose adapter in red connected to the collection vacuum.
-{{woodshop:delta_2inch_4inchadapter.png?150}}
+As with all things in the woodshop saw dust collection is an important responsibility of the machine user. A
+cleaner environment results in less machine wear and better human health.
+If one is going to use this machine one **MUST** connect a vacuum system to the machines dust port. In addition the rooms overhead air filters must be turned on.
-This image shows the adapter connected to the belt dust port.
+For this specific machine there are two vacuum options, the larger red Bauer and the smaller portable Hercules vacuum.
+The Hercules hose can be directly connected to the saws dust port.
-{{woodshop:delta_dust_hose_belt_port.png?150}}
+Using the large Bauer vacuum may result in a better dust reduction due to it's increased volume. However, it does require an adapter system to make the hose connection. That adapter is the same as used for the Delta belt sander and is available in the room.
 This image shows the Hercules vacuum hose connected directly to the jigsaw. This hose fits somewhat more securely than does the Delta sander adapter,