Differences

This shows you the differences between two versions of the page.

--- laser_material_library [2025/06/19 18:05] – 8c244b37-0747-c193-0a4e-0967254778dd
+++ laser_material_library [2025/06/21 22:28] (current) – add local setting table 8c244b37-0747-c193-0a4e-0967254778dd
@@ Line 23: / Line 23: @@
 The settings [[https://smokeyhilldesigns.com/pages/cut-settings|Glowforge Material Settings]]
+----
 ## Custom/Local Setting
@@ Line 29: / Line 30: @@
 ----
-Example:
 ### Trogdor CO2 laser settings
-#### Plywood
+Possible Examples only, these have not been verified:
-#### 3mm
--  TODO mm/min, TODO % power
+^            Engraving                                  ^^^^
-#### 5mm
+^ Material     ^ Speed (mm/sec) ^ Min Power % ^ Max Power % ^
--  TODO mm/min, TODO % power
+| Cardboard    |   250         |   5%        | 10%         |
+| Plywood 1/4" |   250         |   10%       | 15%         |
+^            Cutting                                    ^^^^
+^ Material     ^ Speed (mm/sec) ^ Min Power % ^ Max Power % ^
+| Cardboard    |   80          |   15%       | 20%         |
+| Plywood 1/4" |   10          |   60%       | 65%         |
 ----
@@ Line 45: / Line 52: @@
 #### 5mm
 -  TODO mm/min, TODO % power