Differences

This shows you the differences between two versions of the page.

--- laser_material_library [2025/06/19 17:11] – [Lightburn Materials Library] 8c244b37-0747-c193-0a4e-0967254778dd
+++ laser_material_library [2025/06/21 22:28] (current) – add local setting table 8c244b37-0747-c193-0a4e-0967254778dd
@@ Line 11: / Line 11: @@
 ----
+### Glowforge Materials settings
+The Glowforge laser machine is driven by a cloud based product, not Lightburn. Thus the settings are not loaded into Lightburn unless provided by a local user.
-## Local Setting
+The following settings link can be used as starting values for the Glowforge laser. Values may need to be adjusted based on the wattage of the local machine vs that used to create the library of settings.
-The following settings are those found to be useful for the local Trogdor machine:
-## Plywood
+These setting are courtesy of Smokey Hills Design, a laser supplies company.
-### 3mm
+The Company [[https://smokeyhilldesigns.com/| Smokey Hills Designs]]
-- Cutting on Trogdor: TODO mm/min, TODO % power
+The settings [[https://smokeyhilldesigns.com/pages/cut-settings|Glowforge Material Settings]]
-### 5mm
+----
-- Cutting on Trogdor: TODO mm/min, TODO % power
+## Custom/Local Setting
+The following settings are those found to be useful by the local members on the local machines. Members are encouraged to add to this list or create a separate file, especially for those items not included in an existing material setting list/library:
+----
-## Acrylic
-### 3mm
+### Trogdor CO2 laser settings
+Possible Examples only, these have not been verified:
-- Cutting on Trogdor: TODO mm/min, TODO % power
+^            Engraving                                  ^^^^
+^ Material     ^ Speed (mm/sec) ^ Min Power % ^ Max Power % ^
+| Cardboard    |   250         |   5%        | 10%         |
+| Plywood 1/4" |   250         |   10%       | 15%         |
-### 5mm
+^            Cutting                                    ^^^^
+^ Material     ^ Speed (mm/sec) ^ Min Power % ^ Max Power % ^
+| Cardboard    |   80          |   15%       | 20%         |
+| Plywood 1/4" |   10          |   60%       | 65%         |
+----
+### Glowforge 40 watt laser settings
+#### Plywood
+#### 3mm
+-  TODO mm/min, TODO % power
+#### 5mm
+-  TODO mm/min, TODO % power
-- Cutting on Trogdor: TODO mm/min, TODO % power