Differences

This shows you the differences between two versions of the page.

--- laser [2025/07/05 14:22] – 8c244b37-0747-c193-0a4e-0967254778dd
+++ laser [2026/02/16 14:14] (current) – ef2d127d-e37b-942b-aad0-6145e54b0c61
@@ Line 1: / Line 1: @@
 # Laser Cutting
-Cut and engrave wood, acrylic, foam, steel, aluminum, etc.
+TheLab has a few different laser machines which can cut and engrave wood, acrylic, foam, steel, aluminum, etc. Each machine is better suited for different tasks. See the machine list below.
-TheLab has a few different laser machines, each better suited for different tasks. See the list below.
+**Discord Channels**:
-----
-- **Area Coordinator**: Jordan Olshevski (`@jordan`)
-- **Discord Channels**:
  [[https://discord.com/channels/690314626289631294/1149799568532320426|All things lasers]]
@@ Line 22: / Line 16: @@
 ----
-## Safety Considerations
-Be sure to read this before burning your first project.
-* [[#A Word About Safety| A Bit About Safety First]]
-----
+## Software
-## The driving software
-The various laser machines may use different software to actually drive the machine mechanism. Some may use a locally installable 3rd party product, others a proprietary cloud driven product. To date we have:
+Lightburn is used to drive all lasers at TheLab, with the exception of the Glowforge which uses proprietary software.
-### Lightburn
-Lightburn is used to drive the Trogdor (CO2) and Shockwave (OmTech Galvo diode) lasers
 * **[[lightburn_basic_instructions|Lightburn Basics in TheLab, in progress]]**
+----
-There is a Glowforge proprietary cloud product that drives the Glowforge laser
+## The Machines
- ??? is used to drive the Calcifer (XTool diode laser)
+### Trogdor 100 Watt CO2
-----
-## The machines
-----
-### Trogdor 100 Watt CO2
 Discord channel: trogdor
@@ Line 61: / Line 47: @@
 {{:trog.jpg?400|}}
-----
+### Omtech LYF-30 Galvo Fiber
-### Omtech LYF-30 Galvo Fiber
 Discord channel: shockwave
@@ Line 72: / Line 57: @@
 {{laser:ohmtechgalvo.jpg?200|}}
-----
 ### Glowforge 40 Watt CO2
 Discord Channel:   TBD
@@ Line 92: / Line 76: @@
 {{laser:glowforgelaser.png}}
-----
 ### Calcifer - Xtool D1 Pro Laser
 Discord Channel: calcifer
 Material to be added
-----
 ## A Word About Safety
@@ Line 110: / Line 94: @@
 * [[https://www.youtube.com/watch?v=7wFjprBOL9A| Kerri Crafts It Safety Video]]
+#### Electromagnetic Concerns for Electronic Implants
+The laser machines can emit strong electromagnetic waves that may interfere with implanted electronic devices such as pacemakers or defibrillators. If you have an electronic implanted device it is strongly suggested you consult with your medical providers before using or being in the vicinity of the laser machines.
 #### Laser light can blind a person
 Different types of laser can permanently damage your eyes and other parts of your body if you
- took a direct hit from the beam. Reflected beams from shiny objects, metal, screw heads, etc may also cause damage.
+ took a direct hit from the beam. Reflected or scattered beams from shiny objects, metal in hold down clamps, screw heads, magnets, etc may also cause damage. Not all eye damage is immediately apparent, some can accumulate over repeated exposure to lower levels.
  — so always follow the laser safety rules.
 **NEVER look directly at a laser beam — it will cause permanent eye damage.**
+A couple of general laser safety links:
 * [[https://laserengravingtips.com/laser-engraving-eye-protection/|Eye Protection]]
 * [[https://www.youtube.com/watch?v=PX-EoUKqSFE| Laser Light is Dangerous]]
+#### Some local safety glasses information
-TheLab makerspace tries to keep a set of laser safe safety glasses available for use. If you cannot locate them please
-post a note to the "laser-general" discord channel or purchase a set for your personal use.
 Be sure the glasses are certified for the frequencies used by the laser you will be operating.
+The light wavelengths of the various local machines:
+\\
+Trogdor:    10600 nm
+\\
+Glowforge 10600 nm
+\\
+OmTech (Shockwave) 1064 nm
+\\
+Xtool D1 Pro (Calcifer)  455 nm
+TheLab makerspace tries to keep a set of laser safe safety glasses available for use. If you cannot locate them please post a note to the “laser-general” discord channel or purchase a set for your personal use.
+**NOTE: There are glasses currently available in TheLab. A couple sets that are certified for the OmTech and other certain diode lasers. Another set that is certified for the CO2 Trogdor and Glowforge lasers. It's not clear at this time the Xtool D1 machine requirement.**
+#### Diode/Fiber laser safety glasses
+The following should be adequate for the Omtech Galvo and certain other diode machines whose laser wavelengths fall within the following ranges:
+\\
+-420 nm & 850-130 nm  OD6
+\\
+-450 nm / 800-2000 nm/1064 nm  OD6
+TheLab's Omtech/diode laser safety glasses cases and certification markings. Verify the proper type by checking the markings on the lens. These glasses have a tint to them, they are **NOT** clear.
+\\
+{{:laser:glasses_case.png?150|}}
+{{:laser:safteyglasses.png?200|}}
+\\
+\\
+#### CO2 laser safety glasses
+For the Trogdor, Glowforge and Xtool D1 machines, the laser light should be contained by their respective enclosures. The laser “should not” fire if the access doors are open. It is imperative that one does not defeat/bypass the door interlocks such that the laser will fire with the door open. This is dangerous for the operator as well as anyone else who may traverse the immediate area.
+TheLab's CO2 laser safety glasses cases and certification markings. These glasses are clear, they do **NOT** have a tint. Verify the proper type by checking the markings on the lens they should be:
+\\
+\\
+- 11000 nm OD6
+\\
+{{:laser:co2_safety_glasses.png?400|}}
+\\
+\\
+Safety glasses may also be purchased from Amazon or other sources.
+\\
+\\
+**Be sure the safety glasses you choose are certified for the frequencies used by the laser you will be operating. Your vision may depend on it.**
 #### Lasers can start fires
@@ Line 134: / Line 166: @@
 There is a fire extinguisher located next to the large red Trogdor machine.
-#### Cutting/engraving certain materials can emit high toxic gases
+* If a fire has started immediately turn off the laser main power switch. This should allow the fire to extinguish, if not you will need to resort to using the fire extinguisher. It’s a CO2 extinguisher so should not damage the machine.
-A couple lists of materials and their response to being cut/engraved. Always investigate how your target material will react
-when exposed to a high powered laser.
+* Immediately notify TheLab discord channels and put a note on the machine to not use until it gets checked over for damage.
+#### Cutting/engraving certain materials can emit highly toxic gases
+A few lists of materials and their response to being cut/engraved. Always investigate how your target material will react when exposed to a high powered laser.
+This link attempts to assign levels of danger to multiple categories of materials. For instance some common species of wood can be dangerous.
+* [[https://db.lasereverything.net/materials| Laser Everything Materials List]]
+Other sources of info:
+\\
  * [[https://lahobbyguy.com/bb/viewtopic.php?t=16&sid=da989c8681ea6cad175f3bc06cd95ddf| One list of dangerous materials]]
  * [[https://cpl.org/wp-content/uploads/NEVER-CUT-THESE-MATERIALS.pdf| More Materials]]