Differences

This shows you the differences between two versions of the page.

--- laser [2025/07/19 21:15] – update safety glasses to include CO2, still need pics 8c244b37-0747-c193-0a4e-0967254778dd
+++ laser [2025/07/20 16:01] (current) – add C02 glasses picture 8c244b37-0747-c193-0a4e-0967254778dd
@@ Line 126: / Line 126: @@
 * [[https://www.youtube.com/watch?v=PX-EoUKqSFE| Laser Light is Dangerous]]
-#### Some local safety glasses information:
+#### Some local safety glasses information
 Be sure the glasses are certified for the frequencies used by the laser you will be operating.
@@ Line 144: / Line 144: @@
 **NOTE: There are glasses currently available in TheLab. A couple sets that are certified for the OmTech and other certain diode lasers. Another set that is certified for the CO2 Trogdor and Glowforge lasers. It's not clear at this time the Xtool D1 machine requirement.**
+#### Diode/Fiber laser safety glasses
 The following should be adequate for the Omtech Galvo and certain other diode machines whose laser wavelengths fall within the following ranges:
@@ Line 158: / Line 160: @@
 \\
 \\
+#### CO2 laser safety glasses
 For the Trogdor, Glowforge and Xtool D1 machines, the laser light should be contained by their respective enclosures. The laser “should not” fire if the access doors are open. It is imperative that one does not defeat/bypass the door interlocks such that the laser will fire with the door open. This is dangerous for the operator as well as anyone else who may traverse the immediate area.
@@ Line 165: / Line 168: @@
 - 11000 nm OD6
 \\
-   Pictures TBD
+{{:laser:co2_safety_glasses.png?400|}}
 \\
 \\