Differences

This shows you the differences between two versions of the page.

--- design_machining_software [2025/03/21 14:34] – created 8c244b37-0747-c193-0a4e-0967254778dd
+++ design_machining_software [2025/03/22 15:37] (current) – Add Hardware to Machning link name 8c244b37-0747-c193-0a4e-0967254778dd
@@ Line 1: / Line 1: @@
-====== Please Note this page is under construction, incomplete at this time. Content will change======
 ======Design/Machine Your Project======
@@ Line 10: / Line 8: @@
 For project design and G-Code generation the software used in TheLab is the Vectric Vcarve Pro Makerspace edition. There are two version of this Vcarve Pro Makerspace edition.
-For further information refer to the Design Software portion of this wiki
+For further information refer to the  [[design_software|Design Software]] portion of this wiki
 =====The Machining/Carving=====
 The second software is the product that executes the required commands to actually manipulate the CNC machine, driving it to create your project. For this TheLab Makerspace uses Carbide 3D's Carbide Motion software to drive the Shapeoko Pro XXL machine. The idea here is to use a design tool to generate the required G-Code and then bring that to Carbide Motion for actual execution.
-For further information refer to the Machine Software portion of this wiki
+For further information refer to the [[machining_software|Machining Hardware/Software]] portion of this wiki