TheLab.ms Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
======Designing Your Project======

Most CNC design software that will produce the G-Code required by the machine driving software used in TheLab can be used to design your CNC project. Whatever you chose, design your project, generate the G-Code and load that into the machine software.

For project design and G-Code generation the software generally used in TheLab is the Vectric Vcarve Pro Makerspace edition, so that will be our focus here. There are two version of this Vcarve Pro Makerspace edition.

=====Master License=====
The TheLab has a Makerspace master license for Vectric Vcarve Pro. This version is a limited full license version which means in addition to being used to design projects it will also generate the required G-Code to be downloaded to the Shapeoko CNC machine. While it is a full version it supports a limited number of users.

This version is installed on one or 2 of the lab computers.

=====Maker License=====
Vectric has made available a free version of Vcarve Pro for Makerspace members to use on their own personal computers. This is a fully capable “design only” version. This means one cannot generate the required G-Code for the CNC machine.

====Member access for personal use====
For member access to this home “free” version you must be invited by a Makerspace CNC area coordinator. They will send you an invite email which you can use to access the Makerspace version. You cannot get this version directly from the Vectric Vcarve site, you must use the invite.
Once installed this version will show “Trial” in the upper left to the right of the product name until you load a file. we believe this "Trial" version does not expire, though we could be wrong.

The idea with the Makerspace edition is to design you project at home, save the project to a file,
transport/load that project file on the lab machine that does have the fully capable version of Vetric Vcarve Pro. With this version generate and save to a file the G-Code for the design.
Once the G-Code is created and saved to a file, it is sent/taken to the Carbide 3D Carbide Motion software which will actually drive the machine

=====Miscl Learning sites/Videos=====
===The following list of sites and video links was compiled by a rank newbie in CNC design/execution. They have not been thoroughly reviewed by knowledgeable users at the time of initial publishing and are not in any particular order of importance.===

**Makerspace Discord members suggested pinned messages documents**

We would encourage you to take a look at the pinned messages found within the Makerspace Discord channel "CNC". These pinned messages offer for some very good tips/tricks and generally important info. Many thanks to those members that came before.

==== Member Suggested Vcarve Learning sites ====

**Mark Lindsay CNC - Tutorials for Absolute Beginners**
* Vectric V12+ for the Absolute Beginner: https://www.youtube.com/playlist?list=PLLuYLaC3-QRMFBT-TzIbMyGtuBurt8GCQ

==== Misc - Learning Vcarve resources====
These are some sites/YouTube videos we have run across when trying to learn the design phase. Some are from Vectric others have been found via a prolific content provider Garret Fromme and others via searching for Vcarve videos online.

====Vetric Specific resources====
* Vectric's Vcarve Training Videos: https://www.vectric.com/support/tutorials/vcarve-pro/?

* Vetric YouTube Channel https: https://www.youtube.com/user/Vectric

* Vcarve Pro Keyboard shortcuts: https://docs.vectric.com/docs/V10.0/VCarvePro/ENU/Help/page/keyboard-shortcuts

* Gadgets: https://gadgets.vectric.com/library#drawing

====What's New in Vetric V12 Videos====

* Sienci Labs Exploring the Top 10 Features of VCarve Version 12 | Ultimate Guide for All Makers: https://www.youtube.com/watch?v=-DE4aF2743w

* Garret Fromme/Kyle Ely: What You Need To Know About Vectric Version 12 (This one has some good v12 UI tips): https://www.youtube.com/watch?v=xQc-PDaH1Po&list=PL1FwpwIc0fypqOak4RYnhK5gCO1mJjumj&index=63

* Kyle Ely Vectric V12 NEW GAME-CHANGING Feature (using AI) - VCarve & Aspire Quick Tip: https://www.youtube.com/watch?v=o-u7xwxR9MU

====Other Vetric Videos====

* What You Need To Know About Saving Files & Update [Vcarve, Aspire & Cut2D] CNC Router Project Design:*
https://www.youtube.com/watch?v=3zryCgAWdUg

* 3D carving with a CNC - Shapeoko 5 Pro / VCarve Pro Speaks to saving from Vcarve and importing into CNC machine: https://www.youtube.com/watch?v=yC30z3ATkO8

* Exporting Gcode from Vectric: https://www.youtube.com/watch?v=NhiPq2Zhfgc

* How to Use Vectric Software w/ Carbide3D CNCs: https://www.youtube.com/watch?v=02GoDWRjvP0

* How To Set Up Your CNC Router Projects Toolpaths The Right Way [Vectric Vcarve & Aspire Tutorial]: https://www.youtube.com/watch?v=g1wp4Rzctl0

====Non Vetric Sites====

** IDC Woodcraft: Garrets Fromme**, seller of bits and associated supplies and videos tutorials, etc. Not Just Vectric centric

* Website: https://idcwoodcraft.com/

* Some of his YouTube videos: https://www.youtube.com/@IDCWoodcraft

* Facebook: https://www.facebook.com/IDCWoodcraft/

* Your CNC Router Kick-Starter Cheat Sheet: (Note: Click on "Go To Site" to download the PDF file)
 https://www.youtube.com/redirect?event=video_description&redir_token=QUFFLUhqblhfeGdFa2lxNjM5aUZ1cnY4NnphU0Jnc05sZ3xBQ3Jtc0tuQmdiak9uRmhMYTRmQUdaVUdqTnY5WUhkQjNmWFpLRnJNOVVLd0lCcXNzVnNfVVdWSlNmLU9Tb056YXZ5SlQ2c29zNVhCS3FQSTRvWElLTzBWQWI3NHQ1Qnk2THBoM3RmcjAxSENzS05TcloxWFlRaw&q=https%3A%2F%2Flink.idcwoodcraft.com%2Fl6ofag&v=KkFRHmu7HzE

* IDC WoodCraft Tutorial for absolute beginner: https://idcwoodcraft.com/pages/for-beginners-learning-center

* How To Setup CNC Router Bits Feeds & Speeds in Vectric Tool Library Database Vcarve & Aspire. The "more" section has a link to a downloadable pdf chart and other info. https://www.youtube.com/watch?v=670Xzgf0LiA

* This one has lots of resource links in the comments section: https://www.youtube.com/watch?app=desktop&v=wJlKiLugy5s

* How to Setup the post processor in Vectric Vcarve, Aspire, amd Cut2D - IDC Woodcraft: https://www.youtube.com/watch?v=1jV4AhQV-2s

**Kyle Ely recommended by Garrett Fromme @ IDC Woodcraft. Offers online Vectric training courses:**

* Website: https://academy.learnyourcnc.com/

* YouTube: https://www.youtube.com/c/LearnYourCNC

* Facebook: https://www.facebook.com/groups/vectrictipsandtricks/

**Mark Lindsay Vectric for the Absolute Beginner** - 
Great series of videos on using Vectric software, starting with job setup...

* Main Youtube: https://www.youtube.com/@MarkLindsayCNC

* Vectric V12+ for the Absolute Beginner – Part 1 – Job Setup and Vector Selection: https://www.youtube.com/watch?v=6RJ1KJau6ww

* Vectric V12 Playlist: https://www.youtube.com/playlist?list=PLLuYLaC3-QRMFBT-TzIbMyGtuBurt8GCQ 

* Older Vectic Playlist: https://www.youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p

**Michael Mezalick:**

 * Youtube: https://www.youtube.com/@mezalick/playlists

**NCViewer.com**
* - Preview G-Code router path: https://ncviewer.com/

**Jonathan Katz-Moses**

* Spiral Bits - Compression VS Upcut VS Downcut VS Straight - Never B..  https://www.youtube.com/watch?v=seAmL6mtqgM

**Timberfalls**

* Elevate Your CNC Game: Climb vs. Conventional Explained: https://www.youtube.com/watch?v=8B8O7MAjlxY

====Other Resources of Interest====

Other things on the list to look at as time permits. Most are just links things that Might be interesting. In no particular order.

* A Reddit Shapeoko Wiki, this is that actual machine that will cut your design 
 https://www.reddit.com/r/shapeoko/wiki/index/

* Udemy.com - pay per course, general CNC: https://udemy.com

* Linkedin Learning - Formerly known as Lynda.com subscription learning, general CNC: https://Lynda.com

* Git Hub “awesome” sites: Just Google “Github awesome CNC” one example: https://github.com/mhatalski/awesome-cnc

* CNC File sharing sites – as usual with the internet, be wary of copyrights. https://www.reddit.com/r/hobbycnc/comments/h9lrsd/ultimate_list_of_all_cnc_file_sharing_sites/?captcha=1