Differences

This shows you the differences between two versions of the page.

--- checklist:trogdor [2025/05/14 15:08] – Fix link to laser material library 8c244b37-0747-c193-0a4e-0967254778dd
+++ checklist:trogdor [2025/07/07 02:53] (current) – [Prepare To Cut] 4aec429a-c0bf-afdb-b8da-b14f41d1b7a9
@@ Line 16: / Line 16: @@
 . ~~checkbox~~ **Turn on machine**: large switch, right side of cabinet
-. ~~checkbox~~ **Confirm blower is running**: ducting will obviously be moving air
+. ~~checkbox~~ **Confirm blower is running and correct blast doors are open**: ducting will obviously be moving air
 . ~~checkbox~~ **Turn on computer**: if it isn't already
 . ~~checkbox~~ **Wait ~10s before opening Lightburn**: a background process needs to configure the laser first
@@ Line 27: / Line 27: @@
 . ~~checkbox~~ **Cut selected graphics (or not)**: sometimes it's helpful to enable "cut selected graphics" in Lightburn, sometimes not. Best to double check if it's enabled before a surprise either way.
 . ~~checkbox~~ **Focus laser to workpiece**: use the `move` tab in Lightburn with the plastic focusing puck or macros from the `console` tab to jog to the right height for common material thicknesses
-. ~~checkbox~~ **Test power/speed**: Pick some starting values by cutting a [material test pattern](https://docs.lightburnsoftware.com/1.7/Reference/MaterialTest) or referencing one from the [[../laser_material_library|laser material library]]
+. ~~checkbox~~ **Test power/speed**: Pick some starting values by using a material test from the box on the top left lid of trogdor, cutting a new [material test pattern](https://docs.lightburnsoftware.com/1.7/Reference/MaterialTest), or referencing one from the [[../laser_material_library|laser material library]]
 . ~~checkbox~~ **Align design to workpiece**: make sure everything fits as expected in x/y axes using Lightburn's frame button