TheLab.ms Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

Cost
We ask for a donation of $0.08 per gram of resin, to cover the costs of the resin, isopropyl alcohol, cleaning materials, gloves, etc.  As of 2025 we do not allow members to supply their own resin anymore, you may use the
water rinseable resin we source from Microcenter.  Should a specific project require another formulation, please reach out on discord to discuss in the appropriate channel.

Donate on PayPal
[[https://www.paypal.com/donate/?hosted_button_id=XHQRUTFXRSWQY | 3D Printing @ TheLab.ms PayPal]]

{{:qr-code_3dprint.png?200|}}

Overall rough draft of process:

Obtain model,
slice in either Anycubic Photon Workshop, or Lychee for the printer being used
TBD:  info about the Photon original, photon SE< and photon mono, and makign them of file export
.photon, .photons, and .pws respectively.

use dedicated flash drive from the appropriate printer and place file on the root directory of the flash drive.
load into machine, 
use front panel interface.
confirm sufficient resin is in FEP container.
print.

Removing prints, rinsing, and curing are in this follow-up set of guidelines [TBD]