Differences

This shows you the differences between two versions of the page.

--- checklist:bambu_quick_start [2025/04/05 17:10] – add verify filament being used section 8c244b37-0747-c193-0a4e-0967254778dd
+++ checklist:bambu_quick_start [2025/04/22 15:26] (current) – add note about print plate adhesion 8c244b37-0747-c193-0a4e-0967254778dd
@@ Line 67: / Line 67: @@
   * Select Printer Type,  Bambu Lab X1, (Nozzle size will depend on what you printer has installed)
-  * Select Plate Type, depending on type type of filament
+  * Select Plate Type, depending on type type of filament.
+   *  **NOTE**: Selecting an incompatible print plate may affect how well an object adheres to the print plate.
   * Bambu Plate Types: https://wiki.bambulab.com/en/filament-acc/acc/plates
   * Add/select your filament. For this if you are not sure if using PLA you can choose Bambu PLA Basic. The following Bambu wiki gives a good overview of filament types/usage:
@@ Line 224: / Line 225: @@
 Within Bambu Studio, Preview tab
-* If the slicing is complete and successful, click on the "Send" button. The following "Send print job to" dialog will be displayed.
+* If the slicing is complete and successful, click on the "Print Plate" menu item at the top right of the window. The following "Send print job to" dialog will be displayed.
 {{bambu:send_print_job.png}}
+Here you can verify the print configuration about to be sent to the printer. Verify the settings/information presented is correct for your project
+ * Estimated time and filament used for the job
+ * Selected filament position within the AMS. This is important if there are other filaments loaded that may be a better match to the filament set in the project than the filament you may have manually loaded.
+ * Currently selected printer name
+ * Printer initialization options
+If those settings are correct, proceed by selecting the "Send" button.
 * A progress bar at the bottom of the dialog will show upload progress.
@@ Line 271: / Line 281: @@
 * **Under no circumstances is it acceptable to use metal tools on these print plates, that will damage them rendering them unusable.**
+==== Miscellaneous things that might be useful ====
+Just a collection of interesting things
+=== Skip an object ===
+If one is printing multiple objects at the same time, occasionally one or more objects may fall over or become separated
+from the print plate. This can result in a whole bunch of print "poop". If this is the case one or more objects in the
+print job can be skipped as described in the Bambu Labs article:
+* [[https://wiki.bambulab.com/en/general/skipping-objects | Article descrbing skipping Objects during print]]
+Just one of several video showing how to skip an object at the printer control screen
+* [[https://www.youtube.com/watch?v=wruAkMj9iRI | Video Showing skip on console]]