Differences

This shows you the differences between two versions of the page.

--- checklist:bambu_quick_start [2025/03/28 22:26] – misc changes 8c244b37-0747-c193-0a4e-0967254778dd
+++ checklist:bambu_quick_start [2025/04/16 17:34] (current) – Add Miscl things section with Skip object 8c244b37-0747-c193-0a4e-0967254778dd
@@ Line 27: / Line 27: @@
 The Lab currently has 2 of the Bambu X1 Carbon printers, know as "Giga" and "PLA Only".
- The "Giga" printer has attached to it a 4 spool AMS, Automatic Material System" option. This facilitates automatic switching of the available filament. Initially this guide will not cover AMS usage.
+* As named, the "PLA Only" printer should be used only with PLA filament.
+* The "Giga" printer can be used with most other filament types.
+Both printers have attached to them a 4 spool AMS, Automatic Material System" option. This facilitates automatic switching of the available filament. Initially this guide will not cover AMS usage.
 ==== The Driving Software ====
@@ Line 56: / Line 61: @@
 * The first step is to To import the your design file. Supported files include .3mf .stl .stp .step .amf .obj.
  * Click File->import->import 3MF/STL/STEP/...
- * The Prepare Tab should automatically open
+* The Prepare Tab should automatically open with your project displayed in the center of a print plate.
- * Note and Correct any errors reported by the Studio
+* Note and Correct any errors reported by the Studio
-== The Prepare Tab ==
+=== The Prepare Tab ===
   * Select Printer Type,  Bambu Lab X1, (Nozzle size will depend on what you printer has installed)
@@ Line 70: / Line 75: @@
 * The remaining items can be left to default until you are more familiar with the process. The default settings should be fine for your first print if it is not too complicated.
-== The Preview tab ==
+=== The Preview tab ===
+ * Select the "Preview" tab
  * Note and correct any errors, add supports to your project if needed.
  * Use the mouse scroll wheel to zoom in and out, left button to view the object from different perspectives, right mouse button to reposition the plate within the view port.
  * Bambu Studio Keyboard Shortcuts:  https://wiki.bambulab.com/en/software/bambu-studio/3d-scene-operations
-* Slice your model
- * If the slicing process notes any errors/concerns they will be presented. One example is if your design needs "supports" to aid in printing parts that hang out over space, unsupported. These you would need to trim from your final product.
+== Slice your model ==
+* Press the Slice Plate button on upper right to start the slicing process
  * Bambu Studio - Complete Beginner’s Guide to Slicing for 3D Printing : https://www.youtube.com/watch?v=xUi54VpSeek
- * Press the Slice Plate button on upper right to start the slicing process
-  * Note and correct as needed any reported errors/warning
-  * If successful a dialog containing "Slice ok" should be displayed. Also you will find a color scheme chart that indicates various characteristics of the pending print process
+ * Note and correct as needed any reported errors/warning
+* If successful a dialog containing "Slice ok" should be displayed. Also you will find a "Color Scheme" chart that indicates various characteristics of the pending print process
+If the slicing process notes any errors/concerns they will be presented. One example is if your design needs "supports" to aid in printing parts that hang out over space, unsupported. These you would need to trim from your final product.
+== More about Supports ==
+* How to create automatic or manual supports: https://www.youtube.com/watch?v=-CUSWpVZsUY
+* Normal vs. Tree Supports: https://www.youtube.com/watch?v=RXVVvZciR9Q
+=== Save/Export Your Project ===
+When done previewing/defining/slicing your project settings on your personal copy of Bambu Studio, save your changes to your thumb drive.
+There are a couple of ways you can do this,
+==== Save the Project ====
+ To save as a full project, select "File->Save Project".
+ Then you can reload the project within the Lab version of Bambu Studio. This will allow you to modify any of your model and printer characteristics. You may need to "reset" some of the characteristics set when viewing your model in your personal version.
+==== Export the data ====
+To export the file data, select "File->Export".
+ \\
+ There are several formats which you can choose when exporting, not all of which may be enabled.
+ * If you use the export as G-code it is not obvious to the author how you can change print characteristics such as nozzle size, filament type, etc.
+ * If you export as a .stl file you can take it to a design program but if you re-import within Bambu Studio will need to repeat the Prepare/Preview steps performed in you personal version.
+\\
+Whatever form you chose it can be taken to TheLab to be loaded on the Lab version of Bambu studio.
-When done previewing/defining/slicing your project settings on your personal copy of Bambu Studio, export the project from Studio as "Export all plate sliced file...". This can then be taken to TheLab to be loaded on the Lab version of Bambu studio
+This will become less burdensome once you become comfortable using the Bambu Studio. Then perhaps you can do the entire workflow within the Lab version, most likely after one or two print cycles.
 ==== Makerspace Bambu Studio ====
@@ Line 94: / Line 131: @@
 === On Lab machine, within Bambu Studio ===
+**//__DO NOT__// log into the Bambu Labs internet site within Bambu Studio with your personal Bambu Lab account. Doing so will prevent the normal print process. The generic Lab account must be used**
+** Do not update the Lab version of Bambu Studio if presented with the option. Confer with the area coordinator and via the "Bambu" discord channel if you have version concerns.**
 * Insert your thumb drive, then import the file you saved at home, the original .stl, gcode, or what ever format Studio will accept.
@@ Line 111: / Line 153: @@
 Here you can select and set as needed your printer characteristics corresponding to the available printer.
  * You can “get” the current state of the selected printer to determine it's characteristics
-** * EDITOR NOTE: MORE NEEDED**
+** * EDITOR NOTE: MORE NEEDED FOR CHARACTERISTICS**
+* Double check that the printer currently selected is the desired idle printer.
+* The dialog will show the expected print duration and filament consumed.
+* The initial default settings, other than printer selection, should be fine until you are more familiar with the implications.
 == On the Preview Tab ==
+* select the "Preview" tab
 * Note and correct any errors
@@ Line 172: / Line 220: @@
 ==== Send Print Job to Machine ====
-If the printer is ready to go and the slicing within Studio is successful and the available printer is selected within Studio then one can on the Preview Tab, click on "Send".
+If the printer is ready to go, the slicing within Studio is successful and the available printer is selected within Studio then one can "Send" the job to the printer. Sending involves uploading the project to the Bambu cloud from which it will then be sent to the selected printer.
-This will transfer the file to the cloud where it will be accessed by the printer while the print is in process. The file is stored on the cloud for a limited time, so one is encourage to save a personal copy.
+Within Bambu Studio, Preview tab
-When file has finished being sent, Bambu Studio will switch to Device Tab view. In the Device Tab view, you can check the current print status.
+* If the slicing is complete and successful, click on the "Send" button. The following "Send print job to" dialog will be displayed.
+{{bambu:send_print_job.png}}
+* A progress bar at the bottom of the dialog will show upload progress.
+* When the "send" is complete, the Device tab will display a camera view along with the expected print time and filament to be consumed.
+* Click on the green arrow on the left mid screen to turn on the video view.
+The following Bambu Lab link will provide further printing details.
+* **NOTE: In spite of this documents suggestion //__DO NOT__// log into the Bambu Labs internet site within Bambu Studio using your personal Bambu Lab account. Doing so will prevent the normal print process. The generic Lab account must be used**
+* Printing from Bambu Studio: https://wiki.bambulab.com/en/p1/manual/print-from-bambu-studio
+==== At the printer ====
+Once the "send" has completed the printer will run through several phases before actually starting to print your project.
+The bed needs to be heated, printer bed leveled, printer calibrated. You can monitor these automatic phases at the printers
+control panel as seen below:
+{{bambu:print_job_progress.png}}
+The following video will give a walk through of the printer's GUI control panel.
+* Graphic User Interface WALKTHROUGH: https://www.youtube.com/watch?v=3LQCO8PTMxc
+==== Verify filament being used ====
+With the AMS system it is easy for your project desires to be out of sync with the actual printer settings.
+Perhaps your project is set to use the filament within position 1 of the AMS. When you get to the Lab you might see an empty position and accidentally load your filament in position 2. Then you initialize the filament load process at the printer itself to load your filament from position 2.
+When you send the print job within Bambu Studion it will do what your "program" says, it will switch to AMS position 1 for the print. Probably not what you had intended.
+This may occur also if your print job filament "type" does not match what is currently in the job specified AMS position, but is available in a different AMS position.
+It's also a good idea to monitor your print job at least in the early stages to ensure it is adhering to the print plate as expected.
 ==== Completing Print ====
-One your print is complete the Studio will display a print complete status
+One your print is complete the Device tab within Studio will display a print complete status message.
+* Don't forget to close "YOUR" instance of Bambu Studio". When doing so discard any "modified values" to prevent any global Studio changes from affecting other members.
+* Make sure you do not close another other instances which may be controller other members unattended print jobs.
+=== Remove you finished print ===
+Generally you can remove your printed job from the print plate via a finger nail scrape, if that proves problematic there are "plastic" scraper tools located in one of the drawers between the printers.
+* **Under no circumstances is it acceptable to use metal tools on these print plates, that will damage them rendering them unusable.**
+==== Miscellaneous things that might be useful ====
+Just a collection of interesting things
+=== Skip an object ===
+If one is printing multiple objects at the same time, occasionally one or more objects may fall over or become separated
+from the print plate. This can result in a whole bunch of print "poop". If this is the case one or more objects in the
+print job can be skipped as described in the Bambu Labs article:
+* [[https://wiki.bambulab.com/en/general/skipping-objects | Article descrbing skipping Objects during print]]
+Just one of several video showing how to skip an object at the printer control screen
+* [[https://www.youtube.com/watch?v=wruAkMj9iRI | Video Showing skip on console]]
-==== Remote Printer Status Access ====
-Bambu supports a remote phone control app called “Bambu Handy” that can be used to monitor printer status, however that access is limited to area coordinators?