Laser Material Library

A place to document known-good powers/speeds for various materials.

• A document detailing starting power/speed settings for a typical 100 watt Co2 laser courtesy of Thunder Laser USA. It is intended to just be a starting point for speed/power settings. As usual it's best to start testing at the lower power settings.
  • https://support.thunderlaserusa.com/
  • Suggested Speed/Power Starting Point, PDF

The following settings are those found to be useful for the local Trogdor machine:

• Cutting on Trogdor: TODO mm/min, TODO % power

• Cutting on Trogdor: TODO mm/min, TODO % power

• Cutting on Trogdor: TODO mm/min, TODO % power

• Cutting on Trogdor: TODO mm/min, TODO % power