Differences

This shows you the differences between two versions of the page.

--- 3dp [2026/02/08 22:55] – ef2d127d-e37b-942b-aad0-6145e54b0c61
+++ 3dp [2026/02/16 19:40] (current) – fe359075-9169-6b6a-53ef-1010575751a6
@@ Line 1: / Line 1: @@
 # 3D Printing
-----
+**Discord Channel**: [#filament-general](https://discord.com/channels/690314626289631294/1201360150087335956)
-- **Area Coordinator**: none currently appointed
-- **Discord Channel**: [#filament-general](https://discord.com/channels/690314626289631294/1201360150087335956)
 ----
@@ Line 12: / Line 8: @@
-## Availability
+### Availability
 The current status of the printers is published to https://members.thelab.ms/machines.
@@ Line 18: / Line 14: @@
-## Cost
+### Cost
 If you use filament provided by TheLab, we ask for a donation of $0.03/gram to cover the costs of the materials.
@@ Line 27: / Line 23: @@
-## Sending Prints
+### Sending Prints
+To prepare a 3D model for printing on the Bambu Lab Printers, you must use Bambu Studio. Bambu Studio is especially designed to work with Bambu Lab Printers.
 Bambu Studio is installed on most of the machines around TheLab and works as advertised.
-Please DO NOT SIGN OUT. If Bambu studio is logged out please `@leadership` in Discord.
+**Please DO NOT SIGN OUT. If Bambu studio is logged out please `@leadership` in Discord.**
-## Attending Prints
+**Slicing: **
+When you are ready to begin slicing, simply open Bambu Studio, click Prepare and drag and drop your model to import
+You may want to rotate or move around your model(s) for easier printing.
+There are only five settings that you should be concerned with when printing.
+**Print Settings: **
+This refers to the size of layers that the printer will use to make your print. By default, the slicer comes with a number of presets ranging from .05 mm to .25 mm. The smaller the number, the higher quality of the print and the longer the print will take. This can be changed by clicking the dropdown menu located on the right-hand side of the slicer near the top.
+**Filament: **
+This should correspond to the type of material you plan on printing with. You can create your own filament profiles that better match your material's temperature and print settings. For normal PLA, the generic PLA material preset should suffice.
+**Printer: **
+Make sure that this matches the printer model that you are planning on printing on. Using the wrong setting here could result in print failure and damage to the printer.
+**Supports: **
+Some prints require supports to print correctly. Models that have significant overhangs or extend at severe angles will require them. Generally the option Everywhere will do a good job of ensuring your print is properly supported, but this process will apply supports liberally and do so in places where it isn't necessary.
+**Infill: **
+Infill percentage determines how much of the inside of your 3D model is filled with your material. Higher percentages will mean slightly longer print times and significantly more material used, so don't overdo it.
+For flexible prints, we recommend 5% to 10% infill.
+For prints made for display or barely any use, we recommend 15% to 20% infill.
+For prints made for light use, we recommend 20% to 40% infill.
+For prints made for heavy use, we recommend 40% or above infill.
+**Loading/Unloading: **
+If you have not loaded your filament yet, follow the guide below to load your printer.
+**Printing: **
+Once you are ready to print, follow the following steps to send the print to the printer.
+In Bambu Studio, once the model has been sliced, click the "Print Plate" button.
+In the printer dropdown, select the correct printer name.
+Bed Leveling and Flow Dynamics are optional, but encouraged
+Click "Send"
+### Attending Prints
 The Bambus are very reliable/safe printers - just stick around to make sure the first layer sticks before letting the print run unattended.
-## Filament Handling
+### Filament Handling
 For now, we do not have the capacity for storing member-owned filament.
@@ Line 43: / Line 82: @@
 For now, please take your filament home within 24hr of the completed print.
-## Etiquette
+### Etiquette
+- If you break something, that's okay! Try to fix it if you're confident that you can, and post in the `#filament-general` channel to let everyone know the current status of the printers
 - If someone else's print has finished, feel free to remove their print and place it in the bin
-- Don't hold up both printers at once unless you've gotten consensus in the `#filament-general` Discord channel first
 - Long prints are okay! Try to run them overnight, leave a note in Discord first.
 - Only use gluestick on plates that require it
 - Vacuum up the inside of the printer enclosure if your print left dust, etc.
+- Don't hold up both printers at once unless you've gotten consensus in the `#filament-general` Discord channel first